物料中的块料由于通过不了卸料器的卸料口,因此会造成物料阻塞并引起流量调节阀产生非真实流量的信号,轻者影响工艺系统的正常生产，重者则会造成原料和燃料之间的比例严重失调,从而造成燃烧设备中的温度过高,导致设备事故。

The block materials in the material cannot pass through the discharge port of the unloader, which can cause material blockage and cause the flow control valve to produce non real flow signals. Mild cases can affect the normal production of the process system, while severe cases can cause a serious imbalance between the ratio of raw materials and fuel, resulting in high temperatures in the combustion equipment and equipment accidents.

       块料破碎阀可水平或者垂直安装在卸料出口处卸料设备的入料端,如流量调节阀或气动切断阀的前部。当有些物料中出现较大块状物时,可即刻将它破碎,以防止这些大块物料堵塞卸料阀门的通道,保证通畅卸料。【电话/微信咨询：陈经理18068546632】

破碎阀的转子上安装有放射状布置的破碎爪，拨动块料物料通过栅格并将其破碎。

块料破碎阀的运转安全性是通过在电控箱中集成的电机转速检测装置来保证,当物料中的某些块料物料无法破碎而卡住转子时,转速检测装置将报警并自动反转，将无法破碎块料物料推开后再进行正转。当正转或反转都被卡住时,破碎阀则自动停机，等待排除故障后再运行。转速检测装置为选配装置,有此要求时需要在设备订货时说明。

常见破碎物料：沫煤、锂矿、结块颗粒、磷酸铁粉、电石渣烧生石灰、碳酸钙、锂电池正极材料碳纳米管材料、硬脂酸盐产品、净化灰块状物料、炭黑结块。

水泥破碎阀  块料破碎阀  电动块料破碎器   电动破碎阀  粉煤灰破碎阀   电石渣破碎阀   斜槽水泥块料破碎阀  水泥结块打散卸料阀【电话/微信咨询：陈经理18068546632】

电动破碎阀  水泥块料破碎机  可拆卸破碎阀、物料破碎阀、粉煤灰破碎打散阀、电石渣破碎打散阀

            《扫二维码-添加 陈经理 微信-咨询破碎卸料阀》

The block crushing valve can be installed horizontally or vertically at the feeding end of the discharge equipment at the discharge outlet, such as the front of the flow regulating valve or pneumatic cut-off valve. When large chunks appear in some materials, they can be immediately crushed to prevent these chunks from blocking the discharge valve channel and ensure smooth discharge.

The rotor of the crushing valve is equipped with radially arranged crushing claws, which move the block material through the grid and crush it.

The operational safety of the block crushing valve is ensured by the motor speed detection device integrated in the electric control box. When some block materials in the material cannot be crushed and get stuck in the rotor, the speed detection device will alarm and automatically reverse, pushing away the block materials that cannot be crushed before proceeding with forward rotation. When both forward and reverse rotation are stuck, the crushing valve will automatically stop and wait for the fault to be resolved before running again. The speed detection device is an optional device, and this requirement needs to be explained when ordering the equipment.