【偏置式旋转阀】适用于≤2kg/cm²系统压力或压差。设置排气口(正压输送时选用)将叶轮旋转带出的气体通过排气口送至排气装置，提高填充效率。

　　Biased rotary valves are suitable for system pressures or pressure differentials of ≤ 2kg/cm ². Set up an exhaust port (selected for positive pressure conveying) to send the gas carried out by the impeller rotation to the exhaust device through the exhaust port, improving the filling efficiency.

　　1. 进料口采用防卡进料口设计，能将物料均匀投入叶轮每个角落。根据不同介质调整间隙设计，采用V形叶片及其他特殊转子形式，物料运行更流畅。

　　2. 进料口设有防切料入口设计，适用于颗粒、块状、片状物料输送。通过减少叶轮与阀体的接触面，物料被拨开分离有更多角度落入叶腔，减少阻力，卡滞问题。

　　法兰形式：圆形、方形、偏置式

　　广泛适用于石化、化工、钢厂、电厂、矿山、水泥、环保等行业中气力输送、计量等场合，尤其适用颗粒料，也可用于粉末料的输送。【电话/微信咨询：陈经理18068546632】

　　偏置式旋转阀产品特点：

　　壳体及主要零部件采用精密铸造，外形美观;

　　高强度的阀体及轴，可承受高压且运转平稳;

　　特殊防卡料设计，避免运转中粒子剪断现象;【电话/微信咨询：陈经理18068546632】

　　先进的轴部密封结构，采用气体吹扫装置防止粉尘进入轴承。

          《扫二维码-添加 陈经理 微信-咨询偏置式旋转阀》

　　1. The feed inlet adopts an anti jamming design, which can evenly feed the material into every corner of the impeller. Adjust the gap design according to different media, adopt V-shaped blades and other special rotor forms, and ensure smoother material operation.

　　2. The feed inlet is designed with anti cutting material inlet, suitable for conveying granular, block, and sheet materials. By reducing the contact surface between the impeller and the valve body, the material is separated and more angles fall into the blade cavity, reducing resistance and jamming problems.

　　Flange form: circular, square, offset type.

　　Widely applicable in industries such as petrochemicals, chemicals, steel mills, power plants, mines, cement, environmental protection, etc. for pneumatic conveying, metering, etc., especially suitable for granular materials, and can also be used for conveying powder materials.